8 stereo hardware units in your favourite order
Integrate all your hardware for sum processing with the Konnektor in your favourite order.
Full analogue signal path.
Connect up to 8 analogue stereo units.
Arrange your signal path by drag & drop inside of your DAW.
Total recall with the DAW-Plug-In
Save your settings with the plug-in in each song.
Create presets with your favourite combinations. Do you always start your mastering with the same devices? With the presets you’re ready to go!
Test different order settings by stepping the presets. What sounds better, the EQ in front of the compressor or the other way around? It only takes a second to find it out.
Build in LR->MS- and MS->LR-Matrix
The Konnektor offers additionally two analogue hardware plug-ins for LR->MS and MS->LR-encoding.
You like to make the bass mono compatible with the hardware EQ? No problem at all. Drag the LR->MS plug-in before the EQ in your signal path and the MS->LR plug-in after the EQ. Now turn the bass down in the right channel of the EQ. Done.
Now do you like to compress the mid and the side signal? Insert your compressor before the MS->LR plug-in.
Do you like the EQ after the compressor? Just move the compressor up one slot. The rest adapts automatically.
Upload the images of your hardware
Upload the images of your hardware into the Konnektor. Now your virtual rack looks like your studio. The images of all of our products are Pre-installed already.
- Controllable by the webpage of the Konnektor or by plug-in (VST, AU, AAX)
- Analog plug-in MS->LR and LR->MS
- Full analogue signal path
- Digital controlled
- Total recall
- Minimum system requirements: Windows 7 or Mac OS X 10.7 (Pro Tools 11 and above)
- XLR main input and output to the mixbus
- 2x8 inputs and outputs sub D connector (XLR or TRS via cable, Tascam layout)
- Connection by network to the DAW
- Internal power supply
- Height: 88,1mm (2HE), width: 483mm, depth: 250mm
...The audio quality is exemplary...
...Tegeler's Konnektor worked flawlessly. The plug-in and web-page controllers both work perfectly and are extremely intuitive...
...with total flexibility and transparent fidelity, this product should be placed very high on any auditioning list, and perhaps at the top...
...I'm very impressed indeed...
Use a Wifi repeater with LAN connector. It builds a bridge between the ethernet of the device and your Wifi network.
Connect the device via network cable to your computer and enable internet sharing.
Use the plugins context menu to show the IP address of the Konnektor. You can also go directly to the Konnektor’s website from the context menu.
The Konnektor gets its IP address from a local DHCP server in you network. You will find the DHCP server in your internet router or network server. Look for a list of taken IP addresses.
Enable internet sharing for your network interface.
Internet Sharingselect your internet uplink (Wifi).
To computer using:check the interface connected to your Konnektor.
Now the Konnektor gets an IP address and the plug-in will find it.
Open the website of the Konnektor from the plugins context menu. Choose the inputs and output your device is connected to and upload that picture on the settings page.
Remove and insert the plugin again into your project and it will show the pictures of your devices.
- macOS Version 1.4.9
- Windows Version 1.4.9
- macOS Version 1.4.8
- Windows Version 1.4.8
- macOS Version 1.4.7
- Windows Version 1.4.7
- macOS Version 1.4.5
- Windows Version 1.4.5
- macOS Version 1.4.4
- macOS Version 1.4.3
- macOS Version 1.4.2
- macOS Version 1.4.10
- Windows Version 1.3.7
- macOS Version 1.1.5
- Windows Version 1.1.5
- macOS Version 1.0.9
- macOS Version 1.0.8
- Windows Version 1.0.5
- Windows Version 1.0.10
- macOS Version 0.60.5
- macOS Version 0.60.0
Price 2.499,00 € (Price incl. 19% VAT., plus shipping)
Multicore D Sub to XLR female
TASCAM pinout, 8x XLR female 3 pin, 1x D Sub 25 pin male, Knurled screw, chrome, 44 mm length, imperial, D Sub locking, imperial, Spliss: 0.5 m, length: 2.0 m
Multicore D Sub to XLR male
TASCAM pinout, 8x XLR male 3 pin, 1x D Sub 25 pin male, Knurled screw, chrome, 44 mm length, imperial, D Sub locking, imperial, Spliss: 0.5 m, length: 2.0 m